Adjustments With The Painting Menu - Sony BVP-900 Series System Manual
Video camera system
Hide thumbs
Also See for BVP-900 Series:
- Product information manual (140 pages) ,
- Maintenance manual (520 pages) ,
- Operation manual (48 pages)
Table of Contents
Advertisement
7-3 Adjustments on the BVP-950/950P
To adjust the skin detail width
Adjustment procedure
1
Set the cursor to "Width" by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the width by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To turn on/off the skin tone detail function
Operating procedure
1
Set the cursor to "Skin Detail" by turning the MIC
1 LEVEL control.
The current status (ON or OFF) starts blinking.
2
Press the MIC 1 LEVEL control.
Each press on the control selects ON or OFF in
turn.
To turn on/off the skin tone detail gate
function
Operating procedure
1
Set the cursor to "Skin Detail Gate" by turning the
MIC 1 LEVEL control.
The current status (ON or OFF) starts blinking.
2
Press the MIC 1 LEVEL control.
Each press on the control selects ON or OFF in
turn.
When the adjustments are completed
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
7-14
Chapter 7 Stand-Alone Operations of Cameras, etc.
7-3-7 Adjustments With the
Painting Menu
By pressing the MIC 1 LEVEL control with the cursor
set at "Painting" on the Operation menu (page 7-11),
the Painting menu appears.
Painting menu
* Painting *
Black
: 0
Detail : 0
Gamma
: 0
Knee
: 0
The following operations can be performed with the
Painting menu.
• Adjustment of the black
• Adjustment of the detail level
• Adjustment of the gamma
• Adjustment of the knee
To adjust the black
Adjustment procedure
1
Set the cursor to "Black" by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the level by turning the MIC 1 LEVEL
control.
3
Press the MIC 1 LEVEL control.
The figure stops blinking and the adjustment is
completed.
To adjust the detail level
Adjustment procedure
1
Set the cursor to "Detail" by turning the MIC 1
LEVEL control, then press the control.
The figure starts blinking.
2
Adjust the level by turning the MIC 1 LEVEL
control.
Advertisement
Table of Contents
