5-5 Storing and Retrieving the Scene Files
The scene files can be stored and retrieved through
button operations either on the MSU-700A/750 or on
the RCP-720/721/730/731/740/741.
5-5-1 Storing a Scene File
Proceed as follows.
When you specify the number of the file in which data
have already been stored, the previous data will be
erased and replaced with the new data.
To store using the MSU-700A/750 or RCP-
720/721/740/741
Scene file operation block
4
1
2
3
4
SCENE FILES
1
Referring to "4-19 Auto Setup," perform the auto
setup operations.
2
Referring to "Chapter 4 Adjustments," adjust the
necessary items according to the scene.
3
Press the STORE button of the scene file control
block so that it flashes.
4
Press the SCENE FILES button of the desired file
number.
The button lights up and the current settings are
stored in the scene file of the specified number.
When the storage is completed, the STORE
button goes dark.
5-22
Chapter 5 File Operations
3
5
STORE
To store using the RCP-730/731
Scene file operation
block
SCENE
RECALL
1
Referring to "4-19 Auto Setup," perform the auto
setup operations.
2
Referring to "Chapter 4 Adjustments," adjust the
necessary items according to the scene.
3
Press the 4 or $ button in the scene file operation
block until the desired file number appears.
4
Press the STORE button.
The current settings are stored in the scene file of
the specified number.
3
4
STORE