Cnu-500 - Sony BVP-900 Series System Manual

WF BNC type (1)
NTSC: 714 mVp-p, 75 ohms
PAL: 700 mVp-p, 75 ohms
Encoded output: 1.0 Vp-p,
75 ohms
WF MODE 4-pin (1)
MIC OUTPUT XLR, 3-pin
0 dBu/–20 dBu, balanced,
2 channels
Camera input/output signals
CAMERA Triax (Kings type for the U.S.A.
and Canada, Fischer type for
Europe)
COAX BNC type (1), 75 ohms
RCP/CNU REMOTE
8-pin, multiconnector
INTERCOM/TALLY/PGM
D-sub, 25-pin (1)
4W/RTS
TALLY: 24 V DC, TTL level or
contact selectable
MIC REMOTE D-sub, 15-pin (1)
INCOM (on the front panel)
XLR, 5-pin (1)
Supplied accessories
Operation Manual (1)
Maintenance Manual Part 1 (1)
AC power cord (1)
AC power plug holder (1)
4-pin connector (1)
Number plate (1 set)
Design and specifications are subject to change
without notice.

8-2-10 CNU-500

General
Power requirements
Models available in the United States:
100 to 120 V AC, 50/60 Hz
Models available in other countries:
100 to 240 V AC, 50/60 Hz
Current consumption 0.4 A max.
Operating temperature
5°C to 40°C (41°F to 104°F)
Dimensions (w/h/d) 424 × 45 × 400 mm
3
(16 /
Mass 7 kg (15 lb 7 oz)
Input and output connectors
CCU 1 through 6 8-pin multiconnector (1 each)
RCP 1 through 6 8-pin multiconnector (1 each)
MSU 8-pin multiconnector (1)
VCS 8-pin multiconnector (1)
AUX 1 and 2 8-pin multiconnector (1 each)
CHARACTER BNC type (2)
video: 0.7 Vp-p,
sync: 0.3 Vp-p
REFERENCE BNC type (1)
0.3 Vp-p with loopthrough
output
RS232C D-sub 9-pin (3)
⁄AC IN
3-pin (1)
Supplied accessories
AC power cord (1)
Plug holder for the AC power cord (1)
Operation Manual (1)
Maintenance Manual (1)
Design and specifications are subject to change
without notice.
× 1 × 15
13 3
/ / inches)
4 16 4
8-19
Chapter 8 Specifications