System To Convert The Aspect Ratio - Sony BVP-900 Series System Manual

1-2 Configuration of the BVP-900-series Camera System

1-2-11 System to Convert the Aspect Ratio

The BVP-900-series camera system can process a
signal for a wide screen with an aspect ratio of 16:9 by
your merely replacing the CCD unit. If either of the
4:3 or 16:9 screen is used in the system, the ARU-701
is not necessary because the screen size can be selected
ARU-702
Aspect Ratio
Converter Unit
BVP-900-series camera with
an OHB-750WS/750WSP/
750WSA/750WSAP installed
ARU-701
Aspect Ratio
Converter Unit
16:9 or 4:3 analog
composite signal
1-24
Chapter 1 Introduction
Analog VTR
4:3 analog
composite signal
S
POWER
I
O
Return video signal
(16:9 analog composite
video signal)
16:9 analog signal
S
CABLE DYNAMIC
MIC
ALARM OFF
SHORT OPEN
CARBON
MAIN CAMERA
POWER POWER
INTERCAM
I I
O O
S
POWER
I
O
16:9 or 4:3 analog
component or
composite video signal
Analog video switcher,
Picture monitor
System to convert the aspect ratio
on the BVP-900/900P or BVP-950/950P.
The aspect ratio is changed via the MIC REMOTE
connector on the CCU-700A/700AP.
For more details, see "3-2-7 Selecting the Aspect Ratio."
Digital video switcher,
digital VTR
16:9 or 4:3
digital video signal
4:3 screen
Black belts are added on
both sides of the screen
CAMERA CONTROL UNIT
16:9 analog component video signal
ASPECT RATIO CONVERTER UNIT
16:9 screen 4:3 screen
Both sides are cut.
Digital video switcher,
chroma keyer
16:9 screen
CCU-700A/700AP/
550A/550AP
16:9 or 4:3 digital
video signal
digital VTR,
digital monitor