Erasing Center Setting; Binding Margin Setting - Muratec MFX-2500 Operating Instructions Manual

Default copy settings
B. Erasing center setting
Note: Default: OFF, Erased margin; 0.1 inch.
The default setting of the erased margins in the erase center function can be
changed within 0.1 – 2.0 inches in 0.1 inch steps.
1
Press , [Copy Set].
MENU
2
Select "B.Erase Center setting" and then
press [Enter].
3
To change the default setting of Erase Center,
select "Erase Center" then press [Enter].
4
Select "ON" or "OFF" then press [Enter] to
save the setting.
5
If you want to change the default value of
erased margin, select "Default" then press
[Enter].
6
Enter desired value, then press [Enter].
7
Press [Exit] or to save the default set-
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the Erase Center icon will be appeared
on the .
LCD
3.2
C. Binding margin setting
Note: Default: OFF, Binding margins; 0 inch.
The default setting of the binding space in the image shift copy function can be
changed within 0.1 – 1.0 inch in 0.1 inch steps.
1
Press , [Copy Set].
MENU
2
Select "C.Margin setting" and then press
[Enter].
3
To change the default setting of the binding
margin, select "Margin" then press [Enter].
4
Select "ON" or "OFF" then press [Enter] to
save the setting.
5
If you want to change the default value of
binding space, select "Default" then press
[Enter].
6
Enter desired value using the cursor key, then
press [Enter].
7
Press [Exit] or to save the default set-
RESET
ting.
Note: Press to return to standby.
RESET
Note: If you set the default setting to ON, the Binding Margin icon will be
appeared on the .
LCD