Quick Memory Transmission; Dialing Symbols - Muratec MFX-2830 Operation Manual

FAX
Chapter1

Quick memory transmission

When sending multiple documents, transmission begins shortly after the first page is scanned.
This greatly reduces the total working time when sending a large amount of documents.
Note
Quick Memory Tx is set to ON by the factory default. (see page 3-196)
Transmits while scanning

Dialing symbols

Inserting the dialing symbols when entering the receiver's number allows a variety of functions
to be added. Dialing symbols can also be used when setting speed-dial.
Key name
Pause
Tone
Pre Fix
3-6
FAX Chapter1 Basic Fax Features
●
Quick Memory Tx
Touch screen display
/P This is used to open the space between dials.
(Ex.) 075-111-2222/P123 #
/T This is used when you want to transmit a tone when connecting to the dial
line.
(Ex.) 075-111-2222/T123 #
/N Enter a "Dial Prefix" to access an alternative phone network, "/N" must be
entered to the first of number.
For how to register and use a Dial Prefix, refer to page 3-137.
Memory Tx
Transmits after scanning is completed
Functions and applications