Replacing The Photoconductor - Ricoh 2400L Operator's Manual

USER MAINTENANCE PROCEDURES LOOKING AFTER THE MACHINE

Replacing the Photoconductor

You should replace the photoconductor to maintain the copy quality after about
every 30,000 sheets have been printed.
If the following display appears, replace the photoconductor.
m
To check how many sheets you've printed, please refer to the section titled
"Counters" (see page 111 ).
1. Lift up the operation panel.
2. Open the upper cover.
3. Remove the toner cassette.
NOTE: Do not shake the cassette,
or toner may spill out.
138