Ricoh 2400L Operator's Manual page 378

OTHER
F
When you press any key on the operation panel. (When the heater roller is cool
halfway.)
Which saving energy mode is best for you?
You have two choices: You can let the roller cool to room temperature or you can
let it cool to the midpoint. To choose which of the two settings you would prefer,
set the user parameter switch.
When you allow the toller to cool to room temperature, energy savings is at
maximum and printing will take a little longer since the roller will take more time to
come to printing temperature. When you select the midpoint, energy savings will
still be achieved and printing will occur more rapidly.
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
k
3. Press until the settings for switch 05
are shown.
The settings that you need to change
are digit 6 (double underline) and 7 (sin-
gle underline).
4. Set one of the two as shown opposite.
To change digit 6, press 6.
To change digit 7, press 7.
5. Finish: Yes and Function
162
ADVANCED FEATURES
j
If you want to let the roller cool to
room temperature.
SW I T CH 0 5 0 0 0 0 0 0 0 0
If you want to let the roller cool
halfway.
SW I T CH 0 5 0 1 0 0 0 0 0 0
j
j k
j k