Ricoh 2400L Operator's Manual page 626

ON/OFF SWITCHES AND USER PARAMETERS
The user parameter switches are outlined below. (*: Factory setting)
Switch 00 - Home position settings
Digit
0 Stamp
Contrast home position
1
2
3 Do not use this setting.
Resolution
4
5
Transmission mode
6
7 Halftone
Switch 01
Digit
0 to 6 Do not change these settings.
If you change any of the contrast, resolution, transmission mode, or halftone settings
before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Feature Expander required).
0
0: Off
Center mark
1
The center mark is not printed when the machine is used for making copies.
2 Reception time
3 TSI printing
4 Checkered mark
5 to 7 Do not change these settings.
170
Digit 2 Digit 1 Setting
0 0 Normal *
0 1 Lighten
1 0 Darken
Digit 5 Digit 4 Setting
0 0 Standard*
0 1 Detail
0: Memory Transmission*
1: Immediate Transmission
0: Off*
Forwarding Mark
1: On *
TECHNICAL REFERENCE
Purpose
0: Off*
Digit 5 Digit 4 Setting
1 0
1 1
1: On
Purpose
Purpose
0: Off*
0: Off*
0: Off*
0: Off*
1: On
Fine
Do not use this.
1: On
1: On
1: On
1: On