Ricoh 2400L Operator's Manual page 474

SENDING A FAX MESSAGE
Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel must
be as shown on the right.
2. Carefully place your fax message face
down into the auto document feeder.
NOTE: You can dial without placing the
message in the feeder first.
Place the document after you
dial the number and go to step 4.
The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
Feed the pages in so that the top edge goes in first.
Do not feed in more than 30 pages.
Do not use unsuitable types of original (see pages
14 and 15).
Adjust the document guides to fit the width of the
pages.
Selecting Contrast and Resolution: See page 23.
Options for Sending a Message: See page 28.
18
ROUTINE OPERATION
GOOD
Do not use pages of different sizes.
The pages should be arranged loosely, but
the leading edges should be tidy, as shown
above.
k
BAD