Ricoh 2400L Operator's Manual page 228

4. Either: F
Scroll through the switches with
F Then go to step 3.
Finish: Yes and Function.
The user parameter switches are outlined below.
*: Default
Switch 00 - Home position settings
Digit
Stamp
0
Contrast home position
1
2
3
Resolution
4
5
Transmission mode
6
7 Halftone
Switch 01
Digit
0 to 6 Do not change these settings.
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
setting before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Feature Expander required)
0
0: Off
Center mark
1
The center mark is not printed when the machine is used for making copies
2 Do not change this setting.
3 TSI printing
4 to 7 Do not change these settings.
and
j
Purpose
0: Off *
1: On (successfully scanned documents will be marked)
Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
0 0 0 Normal *
0 0 1 Lighten
0 1 0 Darken
Digit 5 Digit 4 Setting
0 0 Standard*
0 1 Detail
0: Memory transmission*
1: Immediate transmission
0: Off*
Purpose
Purpose
Forwarding Mark
1: On *
HOW TO USE THIS MANUAL
until the required switch appears.
k
1 X
Digit 5 Digit 4 Setting
1 0
1 1
1: On
0: Off*
0: Off*
X Do not use this
setting.
Fine
Do not use this.
1: On
1: On
11