Ricoh 2400L Operator's Manual page 194

APPENDIX A
Example: Group: 1
Enter 1 on the ten keypad and Yes.
If this group already exists, go to step 4.
If you input the wrong group number,
press No.
3. Either:
If you do not want to program this
group into a Quick Dial key: No
and go to step 6.
If you want to program this group into
a Quick Dial key: Yes.
4. Press the Quick Dial key in which you
wish to store this new group.
Example: Quick Dial key 08.
If you press the wrong key: No.
5. Yes.
6. Either:
If you want to program a label for this
Group: Press Yes and go to step 7.
If you do not wish to program a label:
Press No and go to step 9.
7. Input a label using the Quick Dial keys
and the ten keypad (such as DISTRIBU-
TORS).
8. Yes.
9. Input the number that you wish to store in
the group. For example:
Quick Dial 25: Press the 25 on the
ten keypad.
Speed Dial 00: Speed Dial key
and then 0 and 0 from the ten key-
pad.
Full number: Input it at the keypad
on the operation panel.
INITIAL SETTINGS
n
n t
n
t t t t t t t t
t t t t t t t t t t t t t t t t t t t t
n
N
185