Ricoh 2400L Operator's Manual page 344

RECEPTION
Printing from Memory Lock (Feature Expander Required)
If the Receive File indicator is blinking, a message has been stored using
Memory Lock. Print it using the following procedure.
1. Function 5 5 and Yes.
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten key pad.
3. Start.
NOTE: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 122.
List of Special Termi-
nals
(Function 81)
Empty
Empty/Not empty
Not empty
Not empty
128
Memory Lock on/off
(Function 62)
On
Off
On
On
llll
Lock messages from
special terminals, or
Print messages from
special terminals
(Function 63)
Either
Either
Listed
non-listed
ADVANCED FEATURES
Result
All messages are
locked in memory.
No messages are
locked in memory.
Only messages from
special terminals are
locked in memory.
All messages are
locked in memory
except those from
special terminals.