Ricoh 2400L Operator's Manual page 35

SENDING A FAX MESSAGE
3. The settings for switch 00 are now shown
on the bottom line of the display.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit
0 Do not use this setting.
Contrast home position
1
2
3 Do not change this setting.
Resolution home position
4
5
Tramsmission mode home position
6
0: Memory Transmission*
7 Halftone on/off home position
3. If you wish to change one of the settings, press the key on the ten keypad that
corresponds to the digit that you wish to change.
Example: 3 on the ten keypad. The value of digit 3 changes.
4. Finish: Yes and Function.
26
Digit 2 Digit 1 Setting
0 0 Normal*
0 1 Lighten
1 0 Darken
Digit 5 Digit 4 Setting
0 0 Standard*
0 1 Detail
1: Immediate Transmission
Digit
The digits are numbered from 7 to 0;
the setting of digit 7 is shown at the left
side of the display and digit 0 is at the
right.
Purpose
Digit 5 Digit 4 Setting
1 0
1 1
0: Off*
ROUTINE OPERATION
7 6 5 4 3 2 1 0
Fine
Do not change these
settings.
1: On