Ricoh 2400L Operator's Manual page 597

LOOKING AFTER THE MACHINE
1. Prepare a soft damp cloth.
2. Turn off the main power switch.
3. Lift up the operation panel.
4. Clean the separation roller [A] with the
soft damp cloth, while rotating the
roller.
5. Clean the white strip [B] with the soft
damp cloth.
CAUTION:
Do not damage the sensor actuator
[G] (black plastic) on the white stripe.
6. Clean the R1 and R2 rollers [D] with
the soft damp cloth. To rotate the roll-
ers, gently hold the cloth down on the
rollers and turn the main power
switch on. The rollers will rotate once.
USER MAINTENANCE PROCEDURES
A
B
D
G
141