ADVANCED FEATURES
4. Yes.
5. Enter the ID code that you wish to use for
this message.
Example: 2 5 6 7 from the ten key pad.
Note: If you see ALREADY INPUT you already have a message on Secured
Polling standby.
F
To erase the old message: Clear the
old polling file by Function 23. (See
F
page 159 .)
To keep the old message, repeat from
the step 3. And input another ID code.
6. Yes.
7. Start
F
Your fax message is stored and held on polling standby.
NOTE: If you need to cancel a polling transmission operation, use Function 23
(see page 159).
t t t t
OTHER
k
155