Ricoh 2400L Operator's Manual page 348

RECEPTION
k
3. Press until the settings for switch 08 are
shown.
The settings that you need to change
are digit 2 (double underline) and 3 (sin-
gle underline).
4. Set one of the two as shown opposite
Press 2 of the ten key pad to change the
setting of digit 2. Press 3 to change the
setting of digit 3.
5. Finish: Yes and Function
List of Special
Terminals
(Function 81)
Empty
Empty/Not empty
Not empty
Not empty
132
Authorized
Reception on/off
(Function 62)
On
Off
On
On
If you want to accept all incoming
messages from the special termi-
nals.
SW I T CH 0 8 : 0 0 0 0 0 1 0 0
If you want to accept all incoming
messages except those from the
special terminals.
SW I T CH 0 8 : 0 0 0 0 1 1 0 0
Accept messages
from special
terminals listed or
not listed (Function
63)
Either
Either
Listed
non-listed
ADVANCED FEATURES
j k
Result
No messages are
accepted.
All messages are
accepted.
Only messages from
special terminals are
accepted.
All messages are
accepted except
from special
terminals.