Ricoh 2400L Operator's Manual page 918

Basic transmission procedure
Memory Transmission
1
Make sure that the machine is in standby mode.
Check that the Memory indicator is lit.
2
If it is not lit, press MEMORY
3
Carefully place the document in the feeder.
4
Select the contrast and resolusion (and halftone if neccessary)
You may select one or more of the
following options. To select an option,
press the right arrow on the scroll key,
t hen pres s one of the fol low ing
combinations of keys.
5
Personal Code
Send Later
TRD
Page Count
TTI On/ Off
Enter the telephone number in one of the following ways
Quick Dial
6
Speed Dial
Group Dial
Ten Key Pad
7
Press YES
Either:Dial another number go to step 6.
8
then Press Start. To dial another number,
go to step 6. Otherwise, press Start.
The machine stores your meesage in
9
memory, then sends it to each terminal in
sequence.
Immediate Tranmission
Check that the Memory indicator is not
Lit.
If it is lit, press MEMORY
Personal code
Send Later
Set Pages
TTI Print
Quick Dial
Speed Dial
Ten Key Pad
Handset
On Hook Dial
Press START
The machine dials, then your message is
fed, scanned, and sent to the other
terminal.