Ricoh 2400L Operator's Manual page 506

TRANSMISSION
Storing a Keystroke Program
1. Make sure that the machine is in standby
mode (see page 18).
2. Place a sheet of paper in the feeder.
Skip step 2 if you are making a Polling
Reception program.
3. Select all required features (such as Trans-
fer Request) and telephone numbers as
you would normally do.
Contrast, resolution, and halftone cannot be
stored in a keystroke program.
4. Press the Quick Dial key that you wish to
store the program in.
Example: Quick Dial key 01.
Make sure that this key is vacant.
5. To complete the program: Yes.
NOTE: The procedure that you just
stored will now begin. If you do
not wish to use the procedure
now, press Stop immediately.
Labeling a Program
If you store a label for your keystroke programs, the label will appear on the
display when you use the program.
1. Function 3 4 and Yes.
k
If you press
will be printed.
2. Press the Quick Dial key that holds the
program that you wish to label.
Example: Quick Dial key 01 and Yes.
3. To program a label for this program; Yes.
4. Input your label, using the Quick Dial keys.
How to enter the label: see page 166.
50
and Start, a Program List
ADVANCED FEATURES
n t
j
n
n
t t t t t t t t t t t t t t t t t t t t
n
t t t t t t t t
k
j k
k