Ricoh 2400L Operator's Manual page 704

GUIDE TO COMPONENTS
2. Display
Stamp Key
Function Key
Yes/No Keys
Scroll Key
Memory Key
3. Quick Dial Keys
User Function Keys
4. Speed Dial Key
Pause/Redial Key
On Hook Dial Key
Clear Key
Ten Key Pad
Energy Saver Key
Copy Key
Stop Key
Start Key
Displays prompts, warnings, and selected modes.
Press to enable or disable the tramsmission.scanning
verification stamp feature.
Press to use one of the numbered functions explained in this
manual.
Use to answer questions on the display.
When an arrow is shown on the display, use this key to access
the options, items, or functions shown by the arrow. Also use it
to move the cursor when programming or editing a displayed
item.
If the indicator is lit, your document will be stored before
transmission. If it is not lit, your document will be sent
immediately without being stored. Press the key to change the
mode.
Each of these can be programmed with a telephone number, a
group, or a keystroke program. You can also use these keys to
type names and labels such as the RTI and TTI.
Each of these can be programmed for rapid access to frequently
used features. If the light under a key is on, the feature can be
used.
Press this to dial using Speed Dial feature.
Press this if you need to insert a pause when dialing. Or press
this to redial the last number that was dialed.
Press this to dial without picking up the handset.
Use this as a backspace key during programming.
Use this as a telephone keypad, or to enter Speed Dial codes.
Hold a few seconds this to srart or end the energy saver mode.
Press this to copy the document now in the feeder.
Press this to stop the machine and return it to standby mode.
Press this to start fax communication.
OPERATION PANEL
13