Ricoh 2400L Operator's Manual page 353

ADVANCED FEATURES
6. Either:
-Edit the RTI/CSI and press Yes. Then
go to step 7.
- To delete the RTI/CSI: No and Yes.
Then go to step 5.
Caution: If you delete all the RTIs and CSIs for a forwarding station, you
must also delete the forwarding station (see step 3). If you do not
do this, all incoming messages will be forwarded to that station.
7. To store it as a wild card: Yes.
Otherwise: No.
8. Either;
- Edit or input another RTI/CSI for this
forwarding station: Press Yes and Go to
step 3.
- To work on another forwarding station:
press No. Go to step 2.
- Finish: Function.
Note: If you switch the forwarding on and program no RTI/CSI, all incoming
messages are forwarded.
Selecting which messages to forward
F You have to select one of the following two things.
Forward all incoming messages from specified senders.
or F
Forward all incoming messages except those from specified senders.
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
k
3. Press until the settings for switch 08 are
shown.
The settings that you need to change
are digit 6 (double underline) and 7 (sin-
gle underline).
RECEPTION
j
j
j k
137