Ricoh 2400L Operator's Manual page 257

BEFORE YOU SEND YOUR FIRST FAX
To enter the RTI from the standby
F
mode, press Function 6 2 2 2 2 6
1 and Yes. And then press
screen is as shown opposite. Then
press Yes.
If you have just enter the RTI in the
F
previous procedure, press Yes.
2. Either
If no TTI has been stored, input the
H
TTI using the Quick Dial keys and the
ten key pad.
If a TTI has already been stored,
H
and/or you do not wish to edit: No and
go to step 4.
To change or enter the TTI, press
H
Yes, then edit your TTI
Example: XYZ HEAD OFFICE
Note: Not more than 32 characters.
How to program characters , see page 7.
To edit the TTI to XYZ NY OFFICE for
Example move the cursor below H using
and . Press Clear four times and in-
j k
put NY
3. Press Yes to enter the TTI.
4. And you can enter the CSI continuously.
Either;
-Go to step 1 in the following procedure
of CSI programming.
- Press Function to return to the
standby mode.
CSI (Called Subscriber Identification)
Your CSI appears on the other party's operation panel during communication
instead of your RTI, if the other party's machine is another manufacturer's
product. The CSI can have up to 20 characters (only numbers and spaces can be
used). Enter your fax machine's telephone number, because some features of
your machine may not work if the CSI is not the same as the telephone number.
40
until the
k
t t t t t t t t t t t t t t t t t t t t