Ricoh 2400L Operator's Manual page 84

ADVANCED FEATURES
3. The settings for switch 00 are now shown
on the bottom line of the display.
4. Press until the settings for switch 09 are
k
shown.
5. The setting that you need to change is
that for digit 1 (double underlined).
Set as shown opposite.
6. Finish: Yes and Function.
List of Special
Terminals
(Function 81)
Empty
Empty/Not empty
Not empty
Not empty
Printing a Memory-Locked Message
If the Receive File indicator is blinking, a message has been stored using Memory
Lock. Print it using the following procedure.
1. Function 5 5 and Yes.
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten keypad.
3. Start.
NOTE: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 69.
Memory Lock on/off
(Function 62)
On
Off
On
On
If you want to lock messages in memory
only from special terminals:
If you want to lock all incoming mes-
sages, except those from special termi-
nals:
Switch 09
Digit 7
(Function 63)
All messages are
locked in memory.
No messages are
locked in memory.
0 Only messages from
special terminals are
locked in memory.
1 All messages are
locked in memory
except those from
special terminals.
llll
RECEPTION
j k
Result
75