Ricoh 2400L Operator's Manual page 90

ADVANCED FEATURES
If the RTI/CSI of the machine sending you a fax is not the same as any of those
that you have programmed into this feature, the message will not be forwarded.
Cross-references
RTI and CSI: see page 173.
TCR: see page 117.
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press
2. Yes.
3. Store a forwarding station number.
Example: 2 1 2 5 5 5 1 2 3 4
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. Press Yes.
4. Either:
If you wish all incoming messages
to be forwarded to this station: No.
Do not store any RTIs/CSIs for it.
If you only wish messages from
certain senders to be forwarded to
this station:
Input their RTI's or CSI's (mes-
sages from senders other than
these will not be forwarded to this
station): Yes and go to step 5.
5. Type in an RTI or CSI.
For how to enter characters, see page 154.
6. Yes.
7. Either:
Store this RTI as a wild card: Yes.
Otherwise: No.
Wild Cards: see page 86.
.
k
j
t t t t t t t t t t t t t t t t t t t t
t t t t t t t t t t
t t t t t t t t t t t t t t t t t t t t
t t t t t t t t t t
RECEPTION
j k
k
j k
81