Ricoh 2400L Operator's Manual page 159

SOLVING PROBLEMS
Copy paper misfeeds occur
frequently.
Stripes on copies.
TELEPHONING
You can't receive phone calls;
the unit only rings once then
goes into receive mode.
You can't receive phone calls;
the unit does not ring.
POLLING
Dialing took place, but polling
could not.
Is the proper paper in the paper tray?
Paper size and weight must be within the
standards set for this machine.
Is folded, wrinkled, damp, or curled paper in the paper tray?
Always use dry, undamaged paper.
Is the paper set properly in the paper tray?
Always load paper correctly. See page 126.
Make sure that there is not too much paper in
the trays; do not fill them up over the load
limit mark.
Are there any pieces of misfed paper or other foreign objects
in the machine?
Make sure that the paper path is
completely clear of paper and other
material after a misfeed.
Are you copying onto recycled paper?
Fan the stack of recycled paper and load
it in the paper tray.
The exposure glass is dirty.
Clean the exposure glass (see page 129).
Do user maintenance, especially glass [E]
(see page 129).
You are in Auto Receive mode.
Change to Manual Receive mode
(see page 35).
The telephone line is not connected.
Connect the modular cord (see page 167).
ID Codes do not match.
Contact the person at the other end and make
sure that the ID Codes are the same before
trying the communication again.
OPERATING DIFFICULTIES
149