Ricoh 2400L Operator's Manual page 93

RECEPTION
4. Change the on/off setting by pressing
.
k
5. Finish: Yes and Function.
Selecting which Messages to Forward
You have to select one of the following two things.
Forward messages only from specified senders.
or
Forward messages except those from specified senders.
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
3. Press until the settings for switch 08 are
k
shown.
The settings that you need to change is
digit 7 (double underlined).
4. Set as shown opposite.
Press 7 of the ten keypad to change the
setting of digit 7.
5. Finish: Yes and Function.
Switching Local Printing On/Off
When you first switch Forwarding on, messages that your machine passes on are
not printed by your machine. If you turn this function on however, they will be
printed.
1. Press Function and 6, 2, 2, 2, 2, 6, 3 us-
ing the ten keypad, then press Yes.
2. Press Yes, then press
settings for Switch 11 are displayed.
Change the setting of digit 6.
84
or
j
and until the
j k
ADVANCED FEATURES
j
If you want to forward all incom-
ing messages from special termi-
nals.
If you want to forward all incom-
ing messages except those from
special terminals.
j
j
j k
j k
j k