Ricoh 2400L Operator's Manual page 878

TECHNICAL REFERENCE
Switch 03 - Automatic printing of reports
Digit
Communication result report (Memory Transmission)
0
1 Do not change this setting.
2 File reserve report
3 File reserve report (polling reception)
4 Communication result report (polling reception) 0: Off
Transmission result report (immediate transmission)
5
6 Polling clear report
7 Journal
Switch 04 - Automatic printing of reports, Various
Digit
0 Confidential reception report
1 to 6 Do not change these settings
Inclusion of part of the image on the following reports: Communication Result
Report, File reserve Report, Polling Clear Report, Communication Failure Report,
7
Transfer Result Report, Polling Confirmation List
Switch 05 - Various
Digit
0 Substitute reception
1 Memory reception if no RTI or CSI received
2, 3 Do not change these settings
Restricted Access
4, 5
Energy Saver mode
6
7 Do not change this setting.
Switch 06 Home position
Digit
0 Printing TTI
1 Do not change this setting
2 Closed network in transmission
3 Do not change this setting.
4 Batch Transmission
5 to 7 Do not change these settings.
ON/OFF SWITCHES AND USER PARAMETERS
Purpose
0: Off
0: Off*
0: Off*
0: Off
0: Off
0: Off
Purpose
0: Off
0: Off
Purpose
0: Off
0: Possible*
Digit 5 Digit 4 Setting
0 0 Off*
1 X Do not use these settings.
0 Heater off
1 Heater energy saver mode*
Purpose
0: Off
0: Disabled*
0: Off
1: On*
1: On
1: On
1: On*
1: On*
1: On*
1: On*
1: On*
1: On*
1: On*
1: Not possible
Digit 5 Digit 4 Setting
0 1 On
1:On*
1: Enabled
1: On*
187