Ricoh 2400L Operator's Manual page 294

SENDING A FAX MESSAGE
Transmission Mode Home Position Adjustment
The default mode of your machine is Memory Transmission. If you wish, you can
change this home position to Immediate Transmission.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
F
At this time, you can print a User
Parameter List if you press
2. Press Yes.The settings for switch 00 are
now shown on the bottom line of the dis-
play.
The setting that you need to change is
that for digit 6.
3. If you wish to change the setting, press 6
on the ten key pad.
4. Finish: Yes and Function
78
and Start.
j
ROUTINE OPERATION
j
SW I T CH 0 0 : 0 0 0 0 0 0 0 0
Digit 6:(Double underlined)
0: Memory Transmission
1: Immediate Transmission
j
j k