Ricoh 2400L Operator's Manual page 372

OTHER
Options for Polling Transmission
When you store a document in memory for Polling Transmission, you also have
F the following options:
F Personal Code: This is the same as for normal transmission (see page 71 )
F Page Count:This is the same as for normal transmission (see page 75 )
F TTI On/Off: This is the same as for normal transmission (see page 76).
Polling Standby Duration: There are two options.
: The message will be automatically erased from memory after it has
ONCE
been polled once.
: The message will be kept in memory until you erase it yourself using the
KEEP
user parameter of the Function 63. While the message is in the memory, it can
be polled at any time by as many terminals that need it.
The options are only available if the OPT
the display:
k
1. Press .
2. Scroll through the options using the
row on the scroll key, then Yes.
Example: TTI on/off
The list of available options is as follows:
F
Personal Code
F
Page Count
F
TTI
3.- Either:
-If you wish to switch something on or off (TTI), use the
until the displayed setting is correct.
- If you enter something (Personal Code or Page Count)
4. Yes and Function when you have finished.
156
k
can be seen in the top right corner of
k
ar-
k
ADVANCED FEATURES
k
arrow of the scroll key
k