Ricoh 2400L Operator's Manual page 350

RECEPTION
Notes:
Your machine prints all the messages that it forwards. If you do not want it to
do this, change the setting of the user parameter (Function 63) switch 11 bit 6
to '0'.
You can select whether or not your machine transmits a forwarding mark to
be printed at the other end on the top of each page of the output. This mark
brings to the other party's attention that this message has been forwarded.
See page 11 for more about the Forwarding Mark.
If one of the senders changes their RTI/CSI, you must change the stored
RTI/CSI, or you will not be able to forward messages from that sender.
Cross-references
RTI and CSI: see page 38.
TCR: see page 172.
134
Wild Cards: see page 141.
ADVANCED FEATURES