Ricoh 2400L Operator's Manual page 573

ADVANCED FEATURES
8. Repeat from step 5 for the second timer.
k
Press to move the cursor under the
time.
Input on the time, 0 6 0 0, for example, on
the ten keypad.
To change AM to PM and the other
way around, press #. Accept the setting
by pressing Yes.
TO KEEP THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
TO KEEP THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.
9. Either:
Program the timer for another day: Go back to step 3.
Finish: Yes and Function.
NOTE: To print the received messages while the heater is off, press any key. After all the
messages have been printed, the heater will stay on for 5 minutes before switching off again.
Because of this, the Night Timer does not give you complete security for received documents.
For this type of security, use the Memory Lock feature; see page 74.
Temporarily Switching the Heating Roller On
During periods of the Night Timer cycle that the heating roller is off, it may be
switched on in these ways:
When you hold the Energy Saver key down for a few seconds.
When you insert a document in the feeder.
When you pick up the handset, or press On Hook Dial key.
After you leave the machine alone for a while, the heating elements will turn back
off. Note that if Automatic Saver mode is disabled by a service technician, the
night timer will not turn back on.
OTHER
117