Ricoh 2400L Operator's Manual page 789

RECEPTION
Switching Local Printing On/Off
When you first switch Forwarding on, messages that your machine passes on
are not printed by your machine. If you turn this function on however, they will be
printed.
1. Press Function and 6 2 2 2 2 6 3 using
the ten keypad, then press Yes.
2. Press Yes, then press  and
until the
settings for Switch 11 are displayed.
Change the setting of digit 6.
3. If you wish to change the setting, press 6
using the ten keypad.
4. Finish: Press Yes, then press Function.
Enabling and Disabling the Forwarding Mark
The forwarding mark is printed at the receiving end on the top of each page of
the fax messages that are forwarded from your machine. This mark will help the
operator at the other end to recognize messages that have been forwarded. If
you wish, you can switch this mark off.
To switch the Forwarding Mark on or off, do the following procedure. (See page 184 if
you need more information about the User Parameter settings adjustment
procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
3. Press
until the settings for switch 02
are shown.
The setting that you need to change is
digit 0.
4. If you wish to change the setting,
press 0 of the ten key pad.
5. Finish: Yes and Function.
98
ADVANCED FEATURES
 
  

 
     

   
Digit 6 (Double underlined)
0: Local Printing Off
1: Local Printing On
 
  

 
      

  
Digit 0 (Double Underlined)
0: Forwarding Mark is Off
1: Forwarding Mark is On