Ricoh 2400L Operator's Manual page 351

ADVANCED FEATURES
Programming the Forwarding Feature
This section shows you how to set up your machine to forward incoming fax
messages to another location or locations.
1. Function 6 2 2 2 2 8 2 and Yes.
To print a list, press
2. Yes.
3. Store a forwarding station number.
Example: 2125551234
If your machine is behind a PBX, add
the access code before the number, un-
less this forwarding station is an exten-
sion connected to the same PBX as
your machine. And press Yes.
4. Either:
-If you wish all incoming messages to
be forwarded to this station: No.
Do not store any RTIs/CSIs for it.
If you only wish messages from certain
senders to be forwarded to this station:
Input their RTIs or CSIs (messages from
senders other than these will not be for-
warded to this station): Yes and go to
step 5.
5. Type in an RTI or CSI.
How to enter characters, see page 7.
6. Yes.
7. Either:
-Store this RTI as a wild card: Yes
-Otherwise: No
8. Either;
- If you want to store another RTI/CSI,
press Yes and go to step 5.
- Otherwise: No and go to step 9.
9. Either:
- Store another forwarding station; go to
step 3.
- Finish; Function.
k
RECEPTION
j k
j k
j k
t t t t t t t t t t
j k
135