Ricoh 2400L Operator's Manual page 512

TRANSMISSION
5. Yes.
The document is scanned.
6. Either:
If you label this document: Yes.
If no: No and go to step 9.
7. Input a label using the Quick Dial keys.
8. Yes.
9. Either:
Program another Auto Document;
place the document that you want to
be an Auto Document and go to step
3.
Finish: Function.
NOTE:
You can program a Quick Dial number
and an Auto Document in the same
Quick Dial key. If you program the key
as a Quick Dial before programming the
Auto Document, the display below will
appear in step 3. If you press the Yes
key, whenever you press the Quick Dial
key the Auto Document will be attached
to that transmission.
Using an Auto Document
1. Make sure that the machine is in standby mode (see page 18).
2. If you wish to attach a fax message to
your Auto Document, place the fax face
down into the feeder.
3. Press the Quick Dial key that contains the
Auto Document that you need.
Example: Quick Dial key 08.
4. Dial the destination(s), and press Yes.
56
ADVANCED FEATURES
n
t t t t t t t t t t t t t t t t t t t t
n
n
j
n
j k
k
j k
k
k