Ricoh 2400L Operator's Manual page 711

SENDING A FAX MESSAGE
Sending to Just One Location
1. Make sure that the machine is in standby
mode:
The display on the operation panel
must be as shown on the right.
2. Carefully place your fax message face
down into the auto document feeder.
Note: You can dial without placing the
message in the feeder first.
Place the document after you
dial the number and go to step 4.
The pages must be placed face down in the
feeder, with the first page at the bottom of the
stack.
Feed the pages in so that the top edge goes in
first.
Do not feed in more than 30 pages.
Do not use unsuitable types of original (see
pages 15 and 16).
Adjust the document guides to fit the width of
the pages.
20
Selecting Contrast and Resolution: See page 26.
Options for Sending a Message: See page 32.
ROUTINE OPERATION
Do not use pages of different sizes.
The pages should be arranged loosely,
but the leading edges should be tidy, as
shown above.