Replacing The Ink Cartridge; Change Ink Cartridge - Ricoh Fax 680 MP Operator's Manual

When you have used up more than about 83% of the ink cartridge, the,
Power/Check lamp blinks and the following display appears:
When color cartridge is installed in the carrier and used up about 83%,
Power/Check Lamp blinks and the LCD displays as above.
But mono cartridge is not used up about 83% and installed in the carrier the
display shows normally like
1
Press the Function key and 5, 3 using
the Ten Key Pad.
2
Press the Yes key.
3
Open the top cover release button.
Caution: Hold up the top cover while
changing the ink cartridge to
avoid it falling on your fingers.
4
Place your thumb behind the ink car-
tridge handle.
Push the handle firmly toward the back
of the fax.
5
Remove a old ink cartridge.
6
Install a new ink cartridge and close the
top cover.
7
Press the Yes key.
Press the No key when
to change the mono to the color, or vice versa.

REPLACING THE INK CARTRIDGE

5($'<   
1(: ,1." <1
REPLACING THE INK CARTRIDGE
,1. /2:   
.
5($'<   
&+$1*( ,1." <1
&29(5 23(1 &+*
1(: ,1."
is shown, in case that you expect
<1
59