Telephone Line Naming - Comdial DXP Attendant Manual

Attendant Features

Telephone Line Naming

You can assign names to lines to aid users in identifying the proper line to use. A
line name can be up to seven letters in length and will show up in the user's
display.
Name the system telephones as follows:
•
1. USE letter code table (page 92) to compose names for all lines
requiring them (up to seven letters per name are allowed) and
record the names on the line name record (page 99).
2. PRESS INTERCOM.
3. DIAL
4. DIAL code to choose line:
• DIAL
• DIAL
NOTE: If the desired line code is less than three digits, you must dial
once after you dial the line code.
5. DIAL
6. DIAL 2-digit codes that correspond to letters in name (line names
must begin with a letter).
7. DIAL
8. REPEAT steps 4 through 7 until all telephones are named.
9. PRESS SPEAKER to end.
98
*#0*33
.
1# 99#
to
100 128
to
#
to clear any current name.
#
to save name or cleared name.
for lines 1–99,
for lines 100–128.
GCA70-250
#
Attendant Manual