Attendant Features; Lcd Messages - Comdial DXP Attendant Manual

GCA70-250
8

LCD Messages

System users send and receive non-verbal messages for display on their LCD
speakerphones. The system provides five messages and you can add up 25
customized messages. You can even store customized messages in place of the
default messages if you wish, thus increasing the number of custom messages
available. Distribute a list of the LCD messages to the system users for their
reference.
To store the LCD messages, proceed as follows:
•
1. WRITE your messages on the chart on page 93 (each message
can have up to 16 characters).
2. USE the letter code table on page 92 to assign a number to each
character AND WRITE these numbers on page 93 on the chart
line beside the characters in your message.
3. PRESS INTERCOM.
4. DIAL
5. DIAL a message location number (
7. IF message currently exists at location, DIAL
8. COMPOSE your messages by dialing the 2-digit codes that
relate to the letters.
9. DIAL
10. REPEAT previous step until all messages are stored.
11. PRESS SPEAKER to end.
Attendant Manual

Attendant Features

*#0*12
.
#
to save message.
Attendant Features
01 30
to ).
#
to clear.
91