Comdial DXP Attendant Manual page 91

GCA70-250
To set up a conference call on an E & M tie line,
•
1. MAKE first call.
2. SELECT CONF ; call is placed on hold automatically.
3. SELECT next line AND MAKE next call.
4. SELECT CONF to establish conference.
5. Press TRNS/CNF button to add more parties for up to a seven party
conference (including yourself).
To continue conversation on remaining line after other
•
outside lines have dropped out of conference,
1. PRESS the line button of the remaining party.
To retrieve a line from hold and bring that party back into
•
the conference,
1. PRESS TRNS/CNF.
2. PRESS line button.
3. PRESS TRNS/CNF.
NOTE: If all the conference circuits are busy, you will not be able to add a
party to the conference.
To drop out of a conference call between you and two
•
outside lines (creating an unsupervised conference),
1. HANG UP (lines remain lighted and in use until one or both
outside parties disconnect).
To rejoin an unsupervised conference between two outside
•
lines,
1. PRESS TAP.
NOTE: Conference volume levels depend upon the quality of the external
lines.
Attendant Manual
Other Features
81