GCA70-250
Automatic Set Relocation
If your installer has equipped your system with automatic set relocation, when
you move your telephone to a new location, the system gives you a choice
(through a display prompt) as to whether you want to keep your previous
programming or use the programming in the new location.
To maintain the extension number and programming
•
features from the old location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND PRESS HOLD while
the light is still flashing (your telephone immediately assumed the
features from the previous location).
NOTE:
If you do not select a button after installing the telephone, the
system automatically defaults to the programming from the previous
location.
To assume the extension number and programming
•
features from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND DIAL
light is still flashing (your telephone immediately assumes the
features from the new location).
Attendant Manual
Other Features
#
while the
87