Redialing - Comdial DXP Attendant Manual

Making Calls

Redialing

Redial - Last-Dialed Number
The system provides each station with a last number redial feature. This feature
saves 16-digits of the last outside number dialed at the station. A newly dialed
number always replaces a previously dialed number. When you press the last
number redial button, the system will choose a line and redial the saved number.
To redial the last-dialed number,
•
1. PRESS SPEAKER OR HANG UP handset to disconnect current
ringing or busy tone.
2. DIAL
3. LISTEN for ringing or busy tone over the telephone speaker.
Redial Programming (Storing Numbers)
When you use last number redial, you will overwrite the temporary system-saved
number with subsequent dialing activity. However, you can also permanently
save a number that remains available until you overwrite it by saving a different
number at the same storage location.
Non-programmed buttons at multiline telephones are available for you to dynam-
ically save dialed numbers. To save a number, you press any non-programmed
button before hanging up after you dial the number. To dial the saved number,
you press the same button and the system automatically dials the saved number.
To permanently store a number you've
•
just dialed,
1. SELECT SAVE .
2. PRESS unused programmable button.
3. PRESS SPEAKER.
To permanently store a number you've
•
just dialed (alternate method),
1. DIAL number.
2. PRESS programmed SAVED NUMBER REDIAL button (see
Feature Buttons section on page 64 for set up details).
30
#
.
GCA70-250
L123
CONF ARDL
SAVE
Saving a Dialed Number
Attendant Manual