Comdial DXP Attendant Manual page 123

GCA70-250
NOTE: Hold recalls, transfer recalls and park recalls are counted in the ring
queue and not the hold queue.
To place an active call in a serial transfer,
•
1. PRESS the installer-programmed SERIAL
button (the LCD will read 0 SERIAL EXT: , with
the first digit indicating how many intercom
numbers are already entered; the EXT: indicates
a prompt for another intercom number to be
placed in the serial).
2. DIAL intercom number OR PRESS associated
DSS button.
3. REPEAT to add up to two more extensions to the serial.
4. PRESS SPEAKER to end. Serial transfer begins.
To determine the status of individual lines
•
(idle, busy or on hold),
1. PRESS the installer-programmed TEST/BUSY
button (the LCD will display the prompt Enter
Line: ).
2. DIAL the line number to be tested (001–128).
• If the line is idle, you will hear a dial tone,
• If the line is busy, the LCD will display
• If the line is on hold, the LCD will display
Attendant Manual
Busy with xxx ,
On hold at xxx (xxx = line number).
Attendant Features
113