GCA70-250
To re-enable line,
•
1. REPEAT the previous procedure.
Mark Problem Line
The system installer can arrange the system so that you can mark a line that is not
functioning properly.
To mark a line,
•
1. Press MARK or INTERCOM.
2. Dial the installer designated code.
Message Waiting Enabling or Disabling
You can enable or disable the message-waiting feature that was assigned to a user
through their class of service (COS) programming.
Disable a user's message-waiting feature,
•
1. PRESS INTERCOM.
2. DIAL
3. DIAL the user's COS number.
4. DIAL
5. PRESS SPEAKER to end.
To re-enable the message-waiting feature for the originally
•
assigned user,
1. REPEAT the previous procedure.
Attendant Manual
*#0*41 7
#
to disable the user's message waiting feature.
.
Attendant Features
95