Comdial DXP Attendant Manual page 83

GCA70-250
To use Tracker to transfer a call to a park orbit for retrieval
•
and transmit the call's park orbit code and caller ID
information (if available),
1. ANSWER call AND SELECT TRANS .
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT TRACK .
4. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
5. PRESS SPEAKER button to end.
To retrieve a call that you parked using the Tracker option,
•
1. PRESS HOLD button to scroll your held calls, (display shows
PAGE and extension number of each parked call).
2. PRESS TAP to retrieve the displayed parked call.
If you receive a parked call message on your Tracker pager,
•
1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL Tracker pager orbit code (
4. RETRIEVE call.
To enable or disable a Tracker pager at your station,
•
1. PRESS INTERCOM.
2. DIAL
3. PRESS SPEAKER to end.
Attendant Manual
#07
to enable, OR DIAL
#800 #899
to
#06
to disable.
Other Features
).
73