GCA70-250
5
LCD Message Delivery
You can set standard and system supplied custom display messages by dialing a
specific code at your telephone. When another user places a call from an LCD
speakerphone, the preset LCD message from your station will flash on the
caller's LCD. When you set a message, the intercom number light at your
telephone flashes to indicate that the feature is active.
To turn on a message from your telephone,
•
1. PRESS INTERCOM AND DIAL
2. DIAL the desired code number from your message list (01–30)
on the next page, OR PRESS HOLD button to scroll through the
available messages AND DIAL # to select.
NOTE:
See following page for LCD dialing codes.
• For a "Back At" message, dial the code for time numbers
• For a "Call" message, dial code for telephone number of
3. DIAL
To turn off the message and your intercom light,
•
1. PRESS INTERCOM AND DIAL
Attendant Manual
Nonverbal Messaging
and colon from dialing codes table.
(For example, DIAL
05
for the time 01:45).
your new location.
(For example, DIAL
02 02 00 00
#
AND PRESS SPEAKER to end message.
*02
.
# 00 01 29 04
# 09 07 08 15
for the number 978–2200).
#02
.
Nonverbal Messaging
53