Comdial DXP Attendant Manual page 125

GCA70-250
The installer may arrange for the system to sound an external audible alarm (or
turn on an external visual alarm) if certain alarm conditions occur with the T1
service— it is the installer's choice whether the external alarm is audible or
visual. If a T1 alarm occurs, you must take action to turn off the alarm device.
View the status logs by scrolling through them using the interactive buttons on
your telephone. Although you can view a status log and turn off the T1 alarm,
your installer must turn off your SYSTEM STATUS light. After viewing a log
(and also turning off the external T1 alarm if necessary), inform the system
administrator or installer that a system status or T1 alarm condition has occurred,
and describe to him or her the displayed log details.
To view the log,
•
1. PRESS the SYSTEM STATUS button (the
button flashes red when the log contains
entries).
2. SELECT SYSTEM to display the most recent
system status log entry, OR SELECT T1 to
display the most recent T1 log entry.
3. SELECT INFO to display the time and date of
the current entry.
4. SELECT REV to display the previous entry.
5. SELECT FWD to display the next (more
recent) entry.
To display the number of entries in the
•
log,
1. DIAL
To exit the log viewing mode,
•
1. EITHER PRESS the SPEAKER button, PRESS the hookswitch,
OR WAIT for the 15 second timeout.
To turn off the external T1 alarm,
•
1. PRESS INTERCOM.
2. DIAL
3. PRESS SPEAKER to end.
Attendant Manual
#
at any time.
#09
.
Attendant Features
115