Comdial DXP Attendant Manual page 12

Getting Started
Positioning Your Speakerphone
You should adjust the position of the speakerphone on your desk or table to suit
your individual needs and maximize the performance of the sound activated
features. When using your speakerphone, the microphone and loudspeaker are
farther from you than when you use a handset. Some positioning tips to consider
include:
• For the microphone to best detect your voice, speak within three feet of it
and face the speakerphone.
• Background noise may prevent the sound-activated switches from operat-
ing properly. Avoid placing the speakerphone where it will detect sounds
from typewriters, keyboards, printers, paging systems, and other equip-
ment.
• Place the telephone on a hard surface and away from table edges. Do not
place the telephone in corners or enclosures. Do not let obstructions come
between you and the microphone.
If you are using an Impact SCS model, your telephone has an adjustable pedestal
to allow you to select the most comfortable viewing angle. When you receive the
telephone, the pedestal is in its lowest position—flush against the pedestal.
To adjust the pedestal (Models
•
8312S, 8324S and 8324F only),
1. GRASP the rear of the pedestal
base firmly with one hand AND
LIFT the rear portion of the
telephone upward with your other
hand.
2. LIFT the telephone upward with
one hand AND RAISE the
telephone supporting arms upward
with your other hand. (Notice there
are three sets of notches under the
telephone corresponding to the
three positions available.)
3. When the telephone is at the desired height, SELECT the closest
pair of notches AND INSERT the supporting arms in the
notches. PRESS DOWN slightly on the telephone until you feel
the supporting arms snap into place.
Also remember, as with any piece of electronic equipment, your telephone may
be damaged by contact with liquids. So please try to place the telephone in an
area that is free from the danger of spills.
2
Telephone
Supporting Arm
Pedestal Base
Adjusting The Pedestal
GCA70-250
First Notch
Second Notch
Third Notch
(For Highest Position)
PED01
Attendant Manual