Comdial DXP Attendant Manual page 71

GCA70-250
5. CHOOSE your speed dial route from the
following list:
• PRESS line button to select outside line,
• DIAL
• DIAL
• PRESS INTERCOM button or dial
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host system (ask
your attendant about this). To store a pause, press HOLD, then continue
dialing. If your system is behind a host system that needs a hookflash to
access a feature, press TAP to store a hookflash, then continue dialing.
6. DIAL number (up to 16-digits long).
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all numbers are
stored, OR SELECT EXIT .
9. PRESS SPEAKER to end.
Attendant Manual
00
to select prime line or last line
used,
01 16
to
lect intercom.
to select line group,
8
to se-
Programming
Preselect
EXIT
Selecting Line or Intercom
Dial Number
SAVE BKSP EXIT
Dialing a Speed Number
61