Message Waiting Light And Messaging - Comdial DXP Attendant Manual

Nonverbal Messaging

Message Waiting Light and Messaging

A special feature access code allows you to control the message waiting (MW)
light at other stations in the system. When the message waiting light is turned on
at a station, the user can automatically call the station that turned it on. Stations
that include an LCD display show the source of the message.
The installer can program one station as the central message desk and arrange it
for exclusive message waiting control. The central message desk user can
control message waiting lights and deliver messages to and from all other stations
in the system. The installer can also provide a programmable button for placing
and retrieving message waiting calls. Single line telephones only utilize central
message desk signaling. A station can have as many 8 message waiting lights
stacked at one time.
Installers can take programming action to enable or disable the stutter intercom
dial tone received at a station to indicate a message waiting. You can program
this item as a station COS parameter.
To turn on the message-waiting light (and a broken dial
•
tone) at another station that is idle or busy,
1. PRESS INTERCOM.
2. DIAL
3. DIAL extension number OR PRESS DSS/BLF button of station to
be alerted. The message-waiting light of called station will flash.
You can also turn on the message-waiting
•
light and broken dial tone at another
station when that station is busy,
1. HEAR the busy tone AND REMAIN on the
line.
2. SELECT MSG .
3. HANG UP.
56
*3
.
GCA70-250
Calling J Smith
CALLBK MSG
Leaving a LCD Message
Attendant Manual