System Clock; System Status Log - Comdial DXP Attendant Manual

Attendant Features

System Clock

The system clock provides a date and time for display at LCD speakerphones
connected to the system.
To program the system clock for current date and time,
•
1. PRESS INTERCOM.
2. DIAL
3. DIAL 2-digits (01–12) for month.
4. DIAL 2-digits (01–31) for day.
5. DIAL 2-digits (00–99) for year.
6. DIAL 2- digits (00–23) for hour.
• Example: 8:15 PM = 2015 (enter
7. DIAL 2-digits (00–59) for minute.
• Example: 8:15 PM = 2015 (enter
8. DIAL
9. PRESS SPEAKER to end.

System Status Log

The system status log gives you information about the status of your system.
Status log entries include: system reset, parity (port number), (port number)
removed, manual reset, and software reset. Your installer must program a
SYSTEM STATUS button on your telephone to provide you with access to the
log display. The light located next to the button serves as the SYSTEM STATUS
light. If the light turns on, it alerts you to enter the log viewing mode by pressing
the SYSTEM STATUS button.
If your system includes T1 telephone line service, your telephone may display a
T1 status log as well as the system status log. The T1 status log entries include
those transmission errors that exceed their installer-programmed thresholds.
114
*#0*01
.
#
to save.
20
for hour).
15
for minute).
Attendant Manual
GCA70-250